|
|
 ~ Maximum width of Body/inner panel is 8". ~ Inner panel must have a hood at least 2" wide that extends from front of inner panel to at least the leading edge of the roof and must be a minimum of 1/2" above inner panel. ~ Maximum front bumper width is 5", must be mounted flat and may not be angled up to act as a Wing. ~ An additional front body panel is allowed on the front of the car but may not extend past the bumper and may not be wider than 4.5" or longer than 3.5". ~ Maximum width of Roof is 7", roof width must be at least .5" narrower than inner panel width where attached to doors. ~ Minimum roof height is 5.0 ~ Maximum Height of body at highest point is 7.0". ~ Maximum roof length is 6.5 inches. ~ A 1/2" rear spoiler is allowed on Roof and is not included in 6.5" max length restriction. ~ Front and Rear windows must be removed; any clear portion is included in max roof length dimension. ~ A home made roof is allowed to have a bend at the front for stability but will be bent flat and included in the 6.5 max length. ~ Side windows and roof must be one piece and separate from the side panels. ~ Side windows must be clear and no portion of side window may overlap side or sail panel. ~ Roof, windows, side and sail panels must be symmetrical. ~ Maximum Side panel length is 17" and no part of the side panels can extend forward of the front axle. ~ Entire side panel must be on one plane and both side panels must be parallel to each other. ~ Front edge of sail panel can not extend more than 1" forward of rear tire leading edge and can not overlap side windows. ~ No additional lips or flaps are allowed with the exception of a 1/4" bend at top and bottom of Side and Sail panel no more than 45 degree. ~ Any material added for the purpose of bracing or supporting the body must be a maximum of 1/2" wide and 5 " long. ~ Bodies must have at least 1/3 of right rear tires exposed when viewed from front, top and rear of car. ~ Rear spoiler chord maximum is 3". ~ No rear wheel cutouts are allowed on the horizontal plane of the inner panel.
bamcarinsurance.com Designed By
|
|---|
