contact JRC Speedway Go to the HomepageGo to the Race ScheduleGo to the Race ResultsGo to the Point StandingsGo to the Track RecordsGo to the Special EventsGo to the Photo GalleryGo to the R/C TracksGo to our R/C StoreGo to our R/C LinksGo to RulesGo to Newville's websiteGo To Dirtoval.com Go to PA Nitro TourGo to OTR SpeedwayGo to Freedom ParkGo to Port Royal SpeedwayGot to MapquestGo to Weather.com



~  Late model bodies may have openings for cylinder head, fuel tank access, glow plug, engine tuning, and exhaust outlets only.
~ Maximum track width is 10".
~ Maximum rear spoiler chord is 2"including any molded in portion.
~ A 1/4" wicker is allowed on top of spoiler in addition to the 2".
~ A left side dam will be allowed with the following dimensions: Max length 14", max height is 2.5" above deck plus a 1/2" bend at top.
~ Side dam leading edge must be at least 3" behind center of front axle with wheels straight.
~ Leading Edge must be perpendicular or angle back (can not angle forward).
~ Side dam must be mounted and braced securely at a 90 degree angle with at least 2 rigid braces.
~ No flopping side dams allowed.
~ A right side spoiler cap or side dam is allowed and can be no longer than 2" forward of spoiler base and no taller than top of spoiler.
~ No additional wings, spoilers, wickers, flaps, vents, doohickeys etc. can be added to body other than what is specifically mentioned above.
~ The body may not be altered in anyway from its stock configuration i.e.: shortened, lengthened, narrowed etc.
~ Reasonable modification may be permitted to allow for cylinder head cooling only.
 
The following bodies are the only bodies that are approved for use in the late model class.
Custom Works #9005 Pro-Mod Lumina
Custom Works #9006 Pro-Mod T-Bird
Custom Works #9012 Eldora Late Model *
McAllister #207 Tulsa Late Model
McAllister #237 Bakersfield Late Model
BMS Racing #TBA Shadow
Factory Works #7357 Concord Late Model
Factory Works #7353 Rocket Late Model
*Eldora roof must be in stock position.


Limited Nitro 2WD Latemodel:
~ Same Rules as the Nitro 2WD Latemodel class with the following exceptions.
~ OS .12 TG production motors only.
~ Motor must be COMPLETELY out of the box stock.
~ Any glow plug is allowed. (only 1 plug washer)
~ Any brand or nitro % fuel is allowed.
~ No modifications allowed. i.e. Porting, Polishing, or Machining.
~ Rotary or slide carburetor version is ok.
~ Maximum rear spoiler chord is 3"including any molded in portion. A 1/4" wicker is allowed on top of spoiler in addition to the 3".
~ NO SIDE DAMS ALLOWED EXCEPT: A left and right side spoiler cap or side dam is allowed and can be no longer than 2" forward of spoiler base and no taller than top of spoiler.


~ Any type of intentional rule violation(s) in this class will result in loss of points in this class and disqualification for that classes remaining events. This does not included nor affect the violating driver's other class entry(s) on that race day. If the rule violation is found to be deliberate the track reserves the right for further action. Any further decision and/or punishment is at the sole discretion of JRC Speedway track officials.

~The goal with this "limited" class is to promote fair and cost effective Nitro Racing. Please consider carefully the ramifications of your actions should you be caught in violation of the rules.





There have been this many visitors since 12-16-07!
bamcarinsurance.com
bamcarinsurance.com

This site maintained by Thelma Grijalva

Designed By

Sean Foote Web Designs © 2008

 
1

 

 
1